Skip to content

Loading TileBatch controls…

Tile count
calculator.

From measured area to a clear order.

Estimate tiles and whole boxes, with allowance
and purchased coverage shown separately.

Count tiles and whole boxes

Use actual tile face size and the package quantity.

66required tiles
9whole boxes

72 tiles purchased · 144 ft²

Adjusted area: 132 ft² · Tile area: 2 ft²

Box coverage: 8 × 2 = 16 ft² per box

From measured area to purchased coverage

Measured:120 ft²Allowance:12 ft²Box rounding:12 ft²

144 ft² purchased = 24 ft² above the measured area.

Area estimate only: grout and cuts are excluded. Use Layout Studio for a specific arrangement.
Allowance is your planning input; check actual tile dimensions and packing before ordering.

How it works

Tape measure across a real tile

Measure area and tile

Use actual tile dimensions
and consistent units.

Calculator and quantity notebook

Add your allowance

Keep extra material separate
from the measured area.

Blue and terracotta tile samples

Round to whole boxes

Round tile quantity up, then
buy complete boxes.

Worked example

120 × 1.10 = 132 ft²Area with10% allowance
132 ÷ 2 = 66 tiles2 ft² per tile
66 ÷ 8 = 8.25 → 9 boxes72 tiles purchased

Questions, Answered.

Does this include grout or cuts?

No. This is an area estimate with separate allowance and box rounding.
Use Layout Studio to review one specific tile arrangement.

Why do boxes cover extra area?

The estimate rounds up to complete tiles and complete boxes. Purchased coverage includes the entered allowance and those rounding increments.

What does the allowance cover?

It is your separate planning input. It does not guarantee sufficient material for breakage, cuts or a particular installation.

Do I need actual tile dimensions?

Yes. Use actual tile face size and the tiles-per-box quantity for one product, rather than nominal sizes or mixed products.

Tile Layout Studio.

Give every edge a plan.

Try a tile orientation, adjust the joints and share
a clear layout with an estimated cut list.

Open the layout studio →